Posts Tagged fire
Hail the conquering heroes! After a week of work, the 2nd floor walls are down, and we’re ready to put the tarp over the floor to protect the wood shop on the first floor!
Thank you friends!
This is what it looked like on the inside. I’d show you pictures of all my equipment, but I’m just learning how to use this blog, and I can’t get it to show any more without everything getting mixed up. You probably don’t want to see them anyway. It’s not a pretty sight. But if you look in the left center of this picture, you’ll see my slab roller under the charred ladder-like thing, and the pug mill is way in the back on the right next to the window. The kiln and wheel are destroyed, even though the kiln’s insides are probably OK, it’s lost all of its wiring, the computer, the power assist on the lid, etc., etc. It must be pretty clear that I’ve lost the building, too, but the amazing thing is that the fire did not go past the floor. Since my shop is on the second floor, we still have the wood shop underneath and the building around it. We’ve been able to walk on the floor to do the clearing, although there are a few holes you have to watch out for.
We’ve been spending the last few days clearing everything out and taking down the walls. We almost have the dumpster filled, and almost all the walls down. We are so blessed to have good friends who have put on their crud clothes and come out to help. They’re coming back tomorrow, and we’ll probably get everything down. Then we have to put a tarp over the top to keep the weather out of the wood shop below. It got lots of water, so it looks like most of the damage there will be rust and such on the machinery. We’ve got a dehumidifier going 24 hours a day, and there are a couple of spots on the floor that are beginning to dry out.